Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateWhy Paradise Homeowners Choose CGI Windows & Doors
We provide independent CGI windows and doors service in Paradise, and what sets our CGI work apart is diagnosis before ordering. We identify the actual series and hardware on your home first, then repair or replace with quality parts that fit it. CGI products reach Paradise homes through independent dealers and contractors, not a single corporate service arm, so a local technician who knows these vinyl windows and entry doors closely is the practical way to keep them working.
Windows and doors are all we do. That focus matters on CGI products, where the sash, roller, pivot and threshold components vary from one system to the next. Our technicians have up to 9 years of experience, and they work on CGI equipment in every corner of Paradise. We repair, install and service CGI windows and doors with quality parts that fit them. We’re an independent service provider and are not affiliated with, authorized by or certified by CGI.
Call (855) 763-9014 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Window Replacement Paradise for Your CGI Windows & Doors?
Because your CGI windows and doors are the only thing we work on, our technicians are tuned to how these specific products wear. They know the sash rollers and pivot bars that CGI horizontal sliders use, the tilt latches and balances that hold single hung and double hung sashes in line, and the threshold and hinge hardware on CGI entry doors. When a 3-lite roller window drags or a sash stops latching, they check the frame for square and weld damage first instead of assuming glass is the problem.
Warranty-safe practice runs through all of it. We service CGI equipment without cutting into framing, altering weep paths or using parts that force a sash out of alignment, and we tell you plainly when a repair protects the value of the unit and when it doesn’t. We don’t stock or sell OEM or genuine CGI parts, and we aren’t a CGI dealer. We do install quality replacement parts that fit CGI hardware properly, which is what keeps a repaired window working after the desert heat has done its part.
From impact-rated to energy-efficient, your options are real. Reach (855) 763-9014 to set up your free estimate.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Common CGI Windows & Doors Problems We Fix in Paradise
Paradise puts its windows and doors between two forces: a desert on one side and the Strip on the other. Homes in the resort corridor and under the airport flight path need real acoustic and solar control, and many sit under HOA replacement rules that are stricter than the county’s. That combination drives the failures we see on CGI products here.
- Worn rollers and pivot shoes on horizontal sliders and 3-lite rollers. Sashes start to drag, jump the track or stop latching completely. Years of dust riding in the bottom channel plus the heat cycling of a Paradise summer grind down the roller assemblies faster than in cooler country.
- Fogging and haziness inside the glass. CGI vinyl windows with insulated glass can develop a hazy film between the panes or a visible desiccant bleed. The sun-exposed edge seal fails first, and once moisture gets into the cavity the unit can’t dry out on its own.
- Frame and sash distortion on dark-colored vinyl. Southern Nevada heat can bow a sash, open a corner weld or pull a weatherstrip gap. The window still closes, but air and dust find the gap, and the sash rides harder every year after that.
- Impact-glass laminate issues. On CGI impact-rated windows, laminate can delaminate or stress-crack around edges exposed to direct sun. That’s a glazing replacement concern, and it needs a trained technician to assess before anything gets ordered.
- Hinge and multipoint lock misalignment on entry and French doors. As the slab or frame shifts with the dry climate, locks stop catching cleanly and the door no longer seals. The dry air also dries out wood door frames and rubber seals, so door hardware needs attention alongside the windows.
If any of these sound like your home, a diagnosis is the fastest route to a real answer. Call (855) 763-9014.
CGI Parts & Our Repair-vs-Replace Approach
CGI-specific hardware matters more than generic universal parts. Sash rollers, pivot bars, tilt latches, balances and the correct glazing seal units are the pieces that fail, and mismatched rollers and latches are a leading cause of repeat failures on these windows. We choose quality parts that fit CGI equipment and treat each scenario honestly before recommending anything.
Glass-only or hardware-only work often makes sense. A fogged pane or a worn roller assembly is a repair, not a reason to tear out a sound frame. But welded-frame distortion and repeated IGU failures usually favor full-frame replacement, because the frame itself has stopped keeping the glass where it belongs. We quote both paths fairly so you can decide. Call (855) 763-9014 for a free estimate.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We identify the CGI system on your home, check the frame for square and weld damage, test the sash travel and inspect the glass edge for seal failure or desiccant bleed. On impact glass, we look at the laminate carefully.
- 2
Repair or install. For repairs we replace the specific rollers, pivots, latches, balances or glass unit rather than the whole window. For installs we set the new CGI unit level, plumb and sealed against the desert climate.
- 3
Test. We cycle every sash and door, confirm the latch or lock engages cleanly, check weatherstrip and weep paths, and verify the glass has no fogging or gap you can feel.
- 4
Warranty. We explain what the repair or install covers, what to watch for in the first hot season, and back the work with a workmanship warranty.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Paradise
We service and install the kinds of CGI windows and doors common on Paradise homes. On the window side, that means CGI vinyl single hung and double hung replacement windows, CGI Sentinel series impact-rated vinyl windows, and CGI 3-lite horizontal slider (3-panel roller) windows. A lot of the local housing stock still runs original single-pane aluminum frames, so these CGI products are often the upgrade path, and the horizontal roller and sliding impact lines are the ones we handle most. On the door side we cover CGI fiberglass and steel entry door systems, including French and multipoint lock configurations. We don’t claim to stock products, but we do install them properly and repair what’s already there.
We Also Service These Brands
Windows and doors are all we do, and we install across a hand-picked roster of eight respected manufacturers. Beyond CGI, we service PGT, CWS, ES Windows and ECO Window Systems, alongside Mr-Glass, Therma-Tru and ViewLux. That range lets us match the product to your home, not the other way around, whether you’re comparing impact-rated, energy-efficient or premium options. One contractor can cover every opening.
FAQs – CGI Windows & Doors Service in Paradise
No. We are an independent CGI service provider and are not affiliated with, authorized by or certified by CGI. We diagnose, repair, install and service CGI windows and doors with quality parts that fit them. Call (855) 763-9014 for a free estimate.
Yes. We install quality replacement parts that match the hardware on your CGI windows and doors, including rollers, pivot bars, tilt latches and balances, and correct glazing seal units. We don’t stock or sell OEM or genuine CGI parts, and we’re not a dealer, so what you get is a fit-appropriate part, not a claim of factory authenticity. Call (855) 763-9014 to talk through your window.
Often, yes. If the vinyl frame is square and sound, a failed insulated glass unit is a glazing replacement, not a window replacement. When IGU failures repeat or the frame itself is bent, full-frame replacement is the honest call. Call (855) 763-9014 for a free estimate so we can tell you which path fits.
Usually worn roller assemblies or pivots. Desert dust riding in the bottom channel and years of heat cycling wear the rollers down, and a flat or seized roller makes the sash ride out of its track. A qualified pro checks the frame for square first, then replaces the specific roller and pivot hardware. Call (855) 763-9014 to schedule a diagnosis.
Yes, especially dark-colored vinyl. The extreme summer heat can bow sashes and open corner welds, which pulls weatherstrip gaps that leak air and dust. A frame that’s only mildly out of square sometimes corrects with hardware, but real distortion is a full-frame replacement case. Call (855) 763-9014 and we’ll assess yours.
On impact windows, check the laminate edges for delamination or stress cracking from sun exposure. On entry and French doors, check the slab for shifting and the hinges and multipoint locks for misalignment. We do both as part of a service visit. Call (855) 763-9014 for a free estimate.
Yes, we supply quality parts that fit CGI hardware properly, which matters because mismatched rollers and latches are a common cause of repeat failures. Universal parts often don’t line up right on these windows. Call (855) 763-9014 to find the right fit.
Repairs and replacements are quoted per job by a written estimate, so the final price is set before work starts. A typical call starts with a 3-lite roller or single hung window that won’t slide or latch, or shows a foggy pane, and the fix hinges on whether it’s hardware, glass or frame replacement. Call (855) 763-9014 for your free estimate.
Book Your CGI Service in Paradise, NV
Ready to get your CGI windows and doors working properly? We provide independent service across Paradise, with a written estimate, fixed pricing and no change orders, backed by a workmanship warranty. Call (855) 763-9014 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Window Replacement Paradise.